Model	HGF-50	HGF-100
Common Size	50mmT×1m×20m 50mmT×2m×20m	100mmT×1m×20m 100mmT×2m×20m
Average Trapping Efficiency	92~97%	97~99%
Initial Pressure Drop	10Pa	15Pa
Final Pressure Drop	130Pa	150Pa
Heat Resistance	170oC
Gram Weight	240-250g/m2	400-410g/m2

HEFIL makes various other models of HGF separator not listed the above table. Please consult with us if you need.

◆Glass Fiber Paint Separator: Using long glass fiber to make into a conformation of the increase in density by non-woven process
◆The glass fibers are strong, resilient, and with high efficiency, low resistance characteristic to catch paint mist
◆The structure of gradually increase the density of fibers can block particles of various sizes at the levels of different density. It has a large capacity of dust quantity
◆Under higher air velocity the separator will still maintain the original shape. It has advantages of low cost and long service life
◆Glass Fiber Paint Separator: With good temperature tolerance
◆With good wet fastness, operating humidity can be100%RH
◆Coloring differentiates the direction of catching dust, the white as a inlet side and the green as a outlet side
◆Can be with galvanized steel or aluminum alloy frame and also expanded metal on the exhaust side, to effectively prevent deformation of the separator under high-speed airflow
◆Can be with galvanized steel or aluminum alloy frame

Size WxHxD(mm)	Eff(%)	Tem(℃)	Initial Pressure Drop
60mmTx1mx20m	97~99	170	10Pa
100mmTx1mx20m			15Pa

◆Suitable as pre-filter or fresh air in general air conditioning system, as well as exhaust gas filters in paint mist exhausts system on the floor of a dry spray booth