- HGF Fiberglass Paint Filter Media: long fiberglass
- Submit Order
Max working temperature: 170℃
Max working humidity: 100%RH
It can be add galvanized steel, aluminum alloy frame and metal mesh in the air outlet side
SpecificationFeatures
Frame structureApplication
Model |
HGF-50 |
HGF-100 |
Common Size |
50mmT×1m×20m 50mmT×2m×20m |
100mmT×1m×20m 100mmT×2m×20m |
Average Trapping Efficiency |
92~97% |
97~99% |
Initial Pressure Drop |
10Pa |
15Pa |
Final Pressure Drop |
130Pa |
150Pa |
Heat Resistance |
170oC |
|
Gram Weight |
240-250g/m2 |
400-410g/m2 |
◆Glass Fiber Paint Separator: Using long glass fiber to make into a conformation of the increase in density by non-woven process
◆The glass fibers are strong, resilient, and with high efficiency, low resistance characteristic to catch paint mist
◆The structure of gradually increase the density of fibers can block particles of various sizes at the levels of different density. It has a large capacity of dust quantity
◆Under higher air velocity the separator will still maintain the original shape. It has advantages of low cost and long service life
◆Glass Fiber Paint Separator: With good temperature tolerance
◆With good wet fastness, operating humidity can be100%RH
◆Coloring differentiates the direction of catching dust, the white as a inlet side and the green as a outlet side
◆Can be with galvanized steel or aluminum alloy frame and also expanded metal on the exhaust side, to effectively prevent deformation of the separator under high-speed airflow
◆Can be with galvanized steel or aluminum alloy frame
◆The glass fibers are strong, resilient, and with high efficiency, low resistance characteristic to catch paint mist
◆The structure of gradually increase the density of fibers can block particles of various sizes at the levels of different density. It has a large capacity of dust quantity
◆Under higher air velocity the separator will still maintain the original shape. It has advantages of low cost and long service life
◆Glass Fiber Paint Separator: With good temperature tolerance
◆With good wet fastness, operating humidity can be100%RH
◆Coloring differentiates the direction of catching dust, the white as a inlet side and the green as a outlet side
◆Can be with galvanized steel or aluminum alloy frame and also expanded metal on the exhaust side, to effectively prevent deformation of the separator under high-speed airflow
◆Can be with galvanized steel or aluminum alloy frame
Size WxHxD(mm) | Eff(%) | Tem(℃) | Initial Pressure Drop |
60mmTx1mx20m | 97~99 | 170 | 10Pa |
100mmTx1mx20m | 15Pa |
◆Suitable as pre-filter or fresh air in general air conditioning system, as well as exhaust gas filters in paint mist exhausts system on the floor of a dry spray booth
Prev: HCF Ceiling Filter
Next:Not next