High energy particulate air (HEPA) filter is a useful device used to collect the fine particles of dust, dander and other allergens. It can improve the air quality and reduce allergy and asthma symptoms. If you want your HEAP filter work more efficiently, you need to replace or clean HEPA filters from time to time. Cleaning HEPA Filters properly is so necessary; otherwise the air filter won’t work effectively. Here are HEPA filter cleaning methods.
The first HEPA filters cleaning methods is locating the HEPA filter. Removing any removable parts of your vacuum or air filter in hand and then locating the dust cup in your vacuum cleaner and then carefully pull it off. The HEPA filter is inside the dust cup, so you need to clean off the dust cup and then put dust into the trash bin. Because the HEPA filter is easy to detach, you don’t have to worry about it.
The second HEPA filters cleaning methods is cleaning the dust off. After long time usage of HEPA filter, it must be covered with lots of dust. At this time, you have to remove the dust off. Prepare a brush firstly and gently scrub the dust into the trash bin. Some particles are hard to clean because it clinging tightly to the HEPA filter. A good choice you can choose that you can knock the filter against a hard surface to break them loose. Once they become loose, you can easily scrub the dust particles off. In addition to a brush, a good amount of compressed air can also help you clean HEPA filter. When it works, it can release air into the Hepa filter H13 and let the dust particles fall into the trash bin. Apart from this, do not forget to wash the HEPA filter’s screen by soaking it in water during the progress. When it was cleaned, do not forget to let air dry it. Before reattaching it to the HEPA filter, you have to make sure it is completely dry, or HEPA filter might be damaged.
The third HEPA filters cleaning methods is reassembling the parts. After the cleaning pares were completely dry, begin to reassemble them together. If you can easily remove the parts, you can definitely reassemble the part. Do not forget to put the dust cap back into the vacuum. Does the cleaning progress finished? No! Test the vacuum cleaner is the last step. If it is working properly, you can use it in next time without any concern.
In a word, mastering the HEPA filters cleaning methods is very useful. So you need to clean HEPA filter from time to time to keep it under good condition to work efficiently. If you still have any problems of cleaning HEAP filters, you can search more methods on the internet.
