High-efficiency particulate air or HEPA is a type of air filter. HEPA filters have many applications, including use in medical facilities, automobiles, aircraft and homes. The filter must satisfy certain standards of efficiency such as those set by the United States Department of Energy (DOE). HEPA filter can remove 99.97% of 0.3 μm particles. So in order to keep it work effectively, you need to clean air filter regularly. Here are some methods to clean HEPA filter with water.
The first method to clean HEPA filter with water is preparing a brush. When you are preparing to clean HEPA filter with water, a brush is needed. Before washing the HEPA filter, you need to put on an air filtering face mask. This is of particular importance if you have allergies or asthma. Then remove your HEPA filters from your vacuum or air purifier. Then you need to gently scrub the dust into the trash bin. The progress won’t consume your energy if the dust is not very much. During the progress you may find that some particles are hard to clean because it clinging tightly. At this time you may need to knock the filter against a hard surface to break them loose. Once they become loose, you can easily scrub the dust particles off. Do not forget to wash the HEPA filter’s screen by soaking it in water during the progress.
The second method to clean Hepa filter H14 with water is preparing a moist paper tower. The next thing you can do is rinsing the other removable parts of your vacuum or air filter. During the progress, you can also wipe the housing of your air filter with a moist paper towel to remove any surface dust. You should remember that rinsing your HEPA filter under a steady stream of water, otherwise it will get damaged. The last step is turning and rotating the filter under the water, the loose surface layer of dust and grime can be removed.
Last but not least, the third method to clean HEPA filter with water is never forgetting to keep it dry before using it. You have to bury it in mind that after wiping away any excess moisture on your filter when you are done scrubbing it, you should sit it on a layer of paper towels and allow it to air dry before putting it back in your vacuum or air purifier. Turn it over mid-way through drying, so you can ensure both sides dry evenly. You must make sure it is dry because a wet filter will not work well as the 'pores' are swollen closed. Far worse, the moisture will get in the motor causing it to fail.
In a word, Cleaning HEPA Filters is necessary if you want to ensure the HEPA filter work effectively.
