Filter Making Technology Change Your Life

Position:Home > News > Industry News > Filter Making Technology Change Your Life

Filter Making Technology Change Your Life

Source:http://www.hefilter.comStartTime:2015-07-23Hits:
The Filter making technology starts from the early 1990s. The filter typically consists of housing; pollution filters and plugs the sender device of three parts. Internal flow channel and filtering mechanism filters are more complex, the design parameters, rationality and quality of products of the manufacturing process, appearance and size assessment conducted on the basis not only comprehensive, but need to combine accurate test resulting filter structural integrity, filtering accuracy, dirt holding capacity and pressure characteristics test data. It is possible to obtain a correct conclusion.

To learn about filter making technology, the every part of the filter is essential to know. Housing is actually a guide of the flow direction of the pressure vessel. The structural design of the housing should be scientifically reasonable to reduce the resistance to flow as much as possible, and should be set by the structure or branching baffle to prevent the phenomenon of high-speed flow impact filter (filter material). Filter is a filter plays the role of the actual filter components. Filter performance are the main factors affecting the level of filter performance. Pollution control systems are generally hydraulic folding cylinder-type filter (the filter), the filter performance of the filter material used mainly by the performance and folding parameters decision.

Needless to say, the performance of the filter material for the filter is very important. Glass fiber filter is the most commonly used hydraulic filter material, when used to further improve the production of single-layer glass fiber filter cartridge filtration efficiency (β value) and dirt holding capacity encountered great difficulties. However, after passing through a lot of trials and comparative analysis, found that a combination of techniques using multi-filter, dirt holding capacity in filtration efficiency, folding properties (folding endurance), and other than the conventional single-layer glass fiber filter is better many, but there is enough room for further improvement. - Multi-layer combination technology that is prescribed method of superimposing a combination of two or more different filtration precision glass fiber filter.

It is worth noting that not just combinations multilayer combination of techniques can achieve good results, improper combinations, will be counter-productive, such as dirt holding capacity but reduced. The filter selection and combination methods are two key factors that influence the success of a multi-layer combination of techniques. By comparison test confirmed that the appropriate choice of Filter media and science in combination, the combination of the use of filters dirt holding capacity multilayer technology can reach the international advanced level of similar products. Due to the excellent performance of the filters and mature filter making technology, Filter Sales are booming.