Easy to say, a combination filter is one that does at least one other processing job at the same time as filtering a suspension. The combination filter combines a powerful 0.01 μm coalescing filter with a highly efficient activated Carbon Filter as an option to the standard 5 μm and 0.01 μm filters. The combination filter medium consists of a relatively standard material, either woven or one of several different types of nonwoven, carrying some additional substance that enables it to perform the extra task. Let’s learn the combination filter working principle now.
This is the combination filter working principle. Firstly, when you found the dusty gas flow from the air inlet into the combination filter dust collector, the first thing you will encounter is that the middle of the air inlet and outlet of the inclined plate and baffle airflow hopper. When the gas flow slowed down due to inertia, the coarse particles of dust in the gas will flow directly into the ash hopper. After the break up the skeleton through internally is fitted with dust bag and dust captured in the outer surface of the Filter bag, the purified gas will flow into the upper part of the bag room in the clean room. Secondarily, in order to know combination filter working principle, you should pay attention to its working progress. Aggregated to the discharge outlet, the dusty gas in the process of purification will fly through the bag, as the same time, it made the plot more and more attached to the bag on the dust. Resistance to increase the bag will cause the air volume gradually reduced. In order to keep combination work normally, you have to control the resistance within a certain range about 140-170 mm water column will be great. About the filter bag cleaning, cleaning triggered by the order of the general control device of the control. Firstly, you should open the pulse valve, then the compressed air within the air bag hole will fly through the injection tube injected into the bag, then the bag will instantly get an expansion, so that the product attached to the bag surface dust will go off the bag regeneration. Cleaning under the powder if the dust goes into the hopper, you should discharge the ash system. Thereby making the product attached to the bag on the dust cycle to pulse cleaning, so that the purge gas to normal by. Last but not least, ensure that the dust removal system is running.
This is the Combination filter working principle. If you are interested in combination filter, you can visit www.hefilter.com.
