Useful Way of Chemical Filter Maintenance

Position:Home > News > Industry News > Useful Way of Chemical Filter Maintenance

Useful Way of Chemical Filter Maintenance

Source:http://www.hefilter.comStartTime:2015-05-18Hits:
At first, you should face up to the function of Chemical filter maintenance. What we are doing is in order to protect the device instead of restoring it. The chemical filters can capture any form of particulate matter including the droplets. Filtering material is soft, fluffy and somewhat silence effect. For the air resistance, there are some air flowing against the shell. The filter can cut any form of air microorganisms. However, the user should not be too serious about the additional filter effect.

As we all know chemical filters has a little noise elimination effect for chemical filter maintenance, but nobody will go by examination of muffler which shall be investigated for the filter. If user requires silence effect, the chemical filters can be equipped with special silencer honestly. In particular, for the gas turbine and the entrance of the large centrifugal air compressor filters, replacing filter elements may not be allowed. If there is no special silencer for chemical filter maintenance, filtering working environment will be very bad. And operators would not be careful with operation.

What is important for the chemical filter maintenance is that the maintenance work requires chemical Filters be carried out in accordance with the requirements in the process of transportation, installation and use to ensure the use effect. After a period of time, all kinds of chemical filters in use have captured too much dust on the filter material surface so that the efficiency of the filter will drop down, which will also affect the supply of air cleanliness and we need to replace filters in time right now.

Specific chemical filter maintenance process mainly include the following several points.
(1) In general cases, when the resistance of the chemical filters is the double of initial resistance, we should replace filter in accordance with the relevant provisions.
(2) At ordinary times, we should regularly test the cleaning area. Besides, the testing data should be satisfied with the design requirement of cleaning room. If the Carbon chemical filters can't meet the requirements, they should be scans. We can also check on the filter sealing system. If the filter leakage takes place, it should be filled with glue or be replaced. When the system is out of use for a long time and we begin to use again, it should be cleaned completely.
(3) In order to prolong the service life of chemical filters, when we run the machine, we should often change the filter mesh.
(4) Of course, we usually meet some problems we can't solve quickly. Please don't worry, we have prepared the following information for you and we hope it can be able to help you. If there is a need, just visit www.hefilter.com for more information.