HVAC filter is a useful invention in modern society. It helps to remove dust, dirt and other debris from the airstream as the air is pulled through the unit, cooled and returned back to the living space. Over time, the particulates will build up and this will lead to decreased efficiency or even equipment failure if the filter is not cleaned. Furnaces can utilize reusable filters which will undoubtedly save costs in the long run. The important thing to remember is they need to be cleaned regularly for optimal performance. So today, I'm going to show you how to use HVAC filters.
As to how to use HVAC filters, you need to know how to replace the Filter in your HVAC system as well. First, locate the filtration or service panel where the filter for your ventilation system is held. ! Slowly undo the panel cover fastener and open up the panel to expose the filter. Remove the old filter and use your measuring tape to record the exact dimensions of your current filter so you can use these measurements to purchase a new filter. Once you have the new filter at home, unwrap the packaging around the filter and slide the new filter into the slot or location where the old Filter was located behind the panel. Secure the panel cover so that the panel is back in place.
As you know clogged and dirty filters in your heating, ventilation, and Air conditioning filters system, also referred to as an HVAC System, can cause the heating and cooling ventilation system to work harder than it should have to, which can ultimately cause higher energy usage and higher energy costs for your home. About how to use HVAC filters, you need to clean HVAC filters when it is dirty. Firstly, turn the power off to the HVAC unit. Look where the return ductwork connects to the side of unit. At that location you will see the filter. Remove the filter by pulling it straight out. Then spray the filter with warm soapy water. Be sure to coat every square inch of the filter. Rinse the filter with warm water to remove the soap residue and dirt. Look over the filter carefully. Look for areas of dirt and grime. Repeat Step 2 as many times as needed to fully clean the filter. Next you need to slide the filter back into its slot on the HVAC unit. The airflow arrow should point toward the unit. Finally, turn the power back on to the HVAC FFU Units.
Please bury these in mind that clean your HVAC filter at least once every 90 days during regular use periods. If you are interested in HVAC filter, you can directly visit www.hefilter.com for further information.
