In modern society, Carbon Filters have become people's first choice among all filtration equipment because it can efficiently absorb and trap particles, chemicals, and other debris from dirty air or water. Carbon filters—whether dry or wet—aren't long-term, reusable filters. Once all of the pores in the carbon completely absorb pollutants, you must replace the filter. As a result, cleaning a carbon filter is inevitable. Actually, cleaning is the main progress of carbon filter maintenance. Now let's see more detailed information about carbon filter maintenance.
For dry carbon filters, firstly you should remove the carbon filter from its filter housing. Slide a crevice tool attachment onto the hose of your vacuum and vacuum one side of the filter to remove dust and dirt using a side-to-side, horizontal motion. Start at the top of the filter and work your way to the bottom. Repeat on the other side. Vacuum the Cartridge filter Housing. If the filter housing has an intake or outgoing air grate, grille or vent, wipe all surfaces with a damp, lint-free microfiber cloth and dry thoroughly with another cloth. Return the filter to the filter housing. If a dry carbon filter's housing or cover or grille has any type of greasy buildup or stains, wash the surfaces with a slightly soapy cloth, rinse with a damp cloth until you've removed all soap residues, grease, dirt or other debris and then wipe dry. Try to remember that always replace a carbon filter when it's time to do so as recommended by the appliance or filter manufacturer. Attempting to re-use the filter long-term can result in poor air or water quality or damage to the appliance or system that houses the filter.
For wet Filters, the first step is also removing the carbon l filter from the filter housing. Place the filter in a container of cool distilled water or aquarium water, if dealing with an aquarium, soak for five minutes and then swish the filter around in the water for three to five minutes to dislodge any debris from the Primary Filter surface. Never wash a carbon filter with soap and water as this negates the carbon's ability to filter air or water. Rinsing carbon filter with hot water does the same as well as helps release any absorbed pollutants into the air. Don't forget to wash a wet carbon filter's housing with chemicals or abrasive cleaners, soap or tap water can permanently damage the filter housing or leave behind chemical residues that can contaminate the water.
Seen from above, the whole progress of Carbon Filter maintenance is not so difficult. It is necessary to pay more attention on the carbon filter maintenance if you want to prolong the lifespan of carbon filter. If you are finding high quality carbon filter, you can get more information www.hefilter.com.
