Tell You Filter Technology Brief Introduction

Position:Home > News > Industry News > Tell You Filter Technology Brief Introduction

Tell You Filter Technology Brief Introduction

Source:http://www.hefilter.comStartTime:2015-05-21Hits:
We are here to make Filter technology brief introduction for you. The occasions match with the kind and the efficiency of filter configuration, which is developed through many years practice. Lesson makes filter makers and designers continuously improve products and engineering design, but usually people only talk about experience without mentioning the lesson. Our air conditioning engineers and filter sales have their own experience. They introduce the project with the actual lesson and constantly hit our past experiences.

About the filter technology brief introduction, special lessons tell people that comfortable air conditioning system is just used for low efficiency filter. After a few years, there will be black stains, fade wall and air conditioning system of formation. Dealing with these problems needs amazing cost. The experienced people can improve the efficiency of the filter in the new design specifications, while others only choose the filter from the angle of health. In order to put an end to the black stains or maintain indoor decorate without fade, clean air conditioning system and air supply filter sales in the city have been more and more important. If only considering the indoor sanitation standard, using the G3 filter is enough.

Some occasions filter configuration is more popular and we think that more reasonable configuration will be developed. There are no much good reason for decades the lessons and experience which can make people select filters according to the configuration.?Filters for airflow resistance, dust and resistance increases are necessary. When the resistance increases to a specified value, the filter will scrap. This is from the filter technology brief introduction. The resistance of the corresponding filters scrap value refers to the choice of the direct relationship between the service life of the filter. System air volume range and the system energy consumption, under normal circumstances, with the final selection of resistance will be the air conditioning designer. Experienced engineers can change the end resistance value of the original design according to the site situation. In most cases, using the filter at the beginning is 2 to 4 times of resistance. But low efficiency between the fiber filtering material gap is bigger and too much resistance will blow dust on the filter, so the G4 is strictly limited to the value of the filter.

For the Air filter sales, different filters with high efficiency are sure to have a wide market with specific filter technology brief introduction. In the process of filtering, it can keep dust out. G4 terminal filter is F7. For example, using the ore-filter ends like the service life of filter is 3 months. After using F5 filters at the end of the service life will be extended to six months. The filter, in the end of the clean room, its value is not high, but the risk of changing filters and indirect cost will be very high. And replacing the ore-filter does not need to shut down, so the experienced owner will spend focus and money on the ore-filter.?If there is a need, just visit www.hefilter.com for more information.