What is Cartridge filter housing? Multi cartridge filter housings are consisted of polypropylene. We can open its cover with hand without using a tool by unscrewing the plastic star grips. The housings have joints for inlet and outlet as well as half plugs for exhausting and draining the clear room and dirty room.
The connections of inlet and outlet are provided with flanges or with GF-union joint. Alternative equipment such as pressure gauges or additional fittings and special position or special type of the nozzles is available. For pressure ranges up to 6 bar or temperatures up to 60°C, a stainless steel plate and ring enhance the cover and the cover flange. All housings are pressure tested before being released to send out. To set up the versions with center posts for easy replacement of the filter cartridges, we open the cartridge sealing nut without pulling out the whole center post from the adapter plate in the housing. Then we can install all standard cartridges with double open end configuration (DOE).
What is Cartridge filter Housing? When withdrawing the center posts, it is able to install cartridges with adapter code 0 or code 5. The versions for code 0 or code 5 cartridges can be provided with a center plate assembly. The cartridges will be fixed by the center plate in their position in order to ensure that the cartridges cannot jump out of the adapter plate when the flow direction will vary or pressure shocks from the outlet line will occur. People have to install the filter housing in a standing position, so that the pipe connections for inlet and outlet are sited horizontal and the cover with the star grips is at the top. The upper connection is the inlet while the lower connection is the outlet. The inlet line has to be linked to the inlet, as the outlet line to the outlet. For tight sealing we introduce a PTFE sealing tape or a sealing paste matched with medium and application. To control and monitor the filter pressure drop for filter cartridge exchange, we recommend you to install pressure gauges and shut off valves in front of and behind the Bag filter housing. To drain the filter housing, suitable ball valves can take place of the drain plugs, as well as the vent plugs of the housing.
I believe most of us have known the answer of what is cartridge filter housing. For more information about cartridge filter housing, please visit the website through the link with www.hefilter.com
